Robo – FPC

ROBO " FPC

 

  • Best for pressurized Applications with standing 5kg/cm2.
  • Mild steel inner tank with special grade non-corrosive pp coating for longer durability.
  • BIS standard solor Flat Plate Collectors.
  • Available Capacity : 200 LPD, 300 LPD, 500 LPD, 1000 LPD .

robo

Technical Specification

CAPACITY
200 LPD 300 LPD 500 LPD
DESCRIPTION
TANK MATERIAL MS PP COATED MS PP COATED MS PP COATED
JOINTS LINEAR TIG WELDED TIG WELDED TIG WELDED
JOINTS CIRCULAR TIG WELDED TIG WELDED TIG WELDED
INSULATION PUF 40-50 mm PUF 40-50 mm PUF 40-50 mm
OUTER TANK MATERIAL POWDER COATED ALUMINUM POWDER COATED ALUMINUM POWDER COATED ALUMINUM
No OF FINS 9 9 9
COLLECTOR AREA [SQM] 4 6 8
NUMBER OF COLLECTORS 2 3 4

FLAT PLATE COLLECTOR SPECIFICATION

As per BIS Spec. No. IS -12933 Part 1 " 5

COLLECTOR:
Type : Aluminum-Copper
Collector size : 2030 x 1030 x 100 mm + 5 mm
Collector Frame : Extruded Aluminum
Finish : Powder coated PO Red
Glass retainer : Extruded Aluminum
Finish : Powder coated Golden Yellow
Header : Copper " 1" ", 0.71 mm thick
Riser : Copper " "" ", 0.56 mm thick
Fin : Aluminum " 0.12 mm thick
Width of Fin : 115 mm
Number of Fins : 09
Bottom sheet : Aluminum sheet, riveted & sealed with silicone Sealant from inside.
Glass : 2000x1000mm, toughened, solar grade, 4mm Thick & efficiency 85%>
Glass Beading : EPDM
Grommets : EPDM
Flanges : Brass
Bottom Insulation : Fiberglass wool, 25 mm thick
Side Insulation : Fiberglass wool, 25 mm thick
Reflective foil : Aluminum
Frame Corners : Sealed from inside with Silicone Sealant
Fasteners : SS 304 grade
Coating : Selective, black chrome " NALSUN Absorptivity > 0.95, Emissivity < 0.2
Bonding between Fin & Raiser : Ultrasonic welding
Bonding between Header & Raiser : Silver Brazing
Test pressure : 5.0 kgs./sq.cm
Packing : Packed in HDPE bags
collector