Sun pot – FPC

SUN POT " FPC

 

  • Sleek tank, stand and collector assembly upto 300 LPD.
  • Non weld technology upto 300 LPD.
  • High efficiency leak proof Flat plate Collectors..
  • Highly suitable for soft water regions.
  • Capacities availability: 100 LPD, 150 LPD, 200 LPD, 300LPD, 500 LPD & 1000 LPD.

sunpot

Technical Specification

CAPACITY
100 LPD 150 LPD 200 LPD 300 LPD 500 LPD 1000 LPD
DESCRIPTION
TANK MATERIAL SS 304 SS 304 SS 304 SS 304 SS 304 SS 304
INSULATION PUF 40-50 mm PUF 40-50 mm PUF 40-50 mm PUF 40-50 mm PUF 40-50 mm PUF 40-50 mm
OUTER TANK MATERIAL PRE COATED GALVONIZED STEEL PRE COATED GALVONIZED STEEL PRE COATED GALVONIZED STEEL PRE COATED GALVONIZED STEEL POWDER COATED ALUMINUM POWDER COATED ALUMINUM
No OF FINS 9 12 9 9 9 9
COLLECTOR AREA [SQM] 2 2.135 4 6 8 16
NUMBER OF COLLECTORS 1 1 2 3 4 8

FLAT PLATE COLLECTOR SPECIFICATION

As per BIS Spec. No. IS -12933 Part 1 " 5

COLLECTOR:
Type : Aluminum-Copper
Collector size : 2030 x 1030 x 100 mm + 5 mm
Collector Frame : Extruded Aluminum
Finish : Powder coated PO Red
Glass retainer : Extruded Aluminum
Finish : Powder coated Golden Yellow
Header : Copper " 1" ", 0.71 mm thick
Riser : Copper " "" ", 0.56 mm thick
Fin : Aluminum " 0.12 mm thick
Width of Fin : 115 mm
Number of Fins : 09
Bottom sheet : Aluminum sheet, riveted & sealed with silicone Sealant from inside.
Glass : 2000x1000mm, toughened, solar grade, 4mm Thick & efficiency 85%>
Glass Beading : EPDM
Grommets : EPDM
Flanges : Brass
Bottom Insulation : Fiberglass wool, 25 mm thick
Side Insulation : Fiberglass wool, 25 mm thick
Reflective foil : Aluminum
Frame Corners : Sealed from inside with Silicone Sealant
Fasteners : SS 304 grade
Coating : Selective, black chrome " NALSUN Absorptivity > 0.95, Emissivity < 0.2
Bonding between Fin & Raiser : Ultrasonic welding
Bonding between Header & Raiser : Silver Brazing
Test pressure : 5.0 kgs./sq.cm
Packing : Packed in HDPE bags
collector